ADEEPT RaspClaws, Руководство пользователя

Страница: 68 / 71

Common issues
Q: Setup.py disconnects during runtime?
A: setup.py will restart automatically after execution. Check to if there is a
line
restart on the console. If so, the installation program has been
executed.
Q: Errors prompt up when running setup.py?
A: An error may occur during the installation process, which is not
necessarily a problem during the installation process. There is also a
server.py file in the package. Whether the installation is completely
successful depends on whether this script can run normally.
Q: After the setup is finished: When installing the servo, the servo
does not return to the original position after it is connected to the
Raspberry Pi . / When using the GUI to connect the Raspberry Pi,
there ’ s an error "target computer actively refuses" / and other
similar problems?
A: There is a server.py file in the server directory of the package. As
mentioned in the installation tutorial, most of the problems are caused
by it not running automatically. Use MobaXterm to connect to the
Raspberry Pi, and try to use the command
sudo python3
adeept_raspclaws/server/server.py to run it manually.
Q:The server.py does not run automatically. It is inconvenient to run
it manually every time, how can I make it run automatically?
A: Ensure that the package installation path is all lowercase. Use the full
lowercase command when cloning a package can make the installation
path of the package all lowercase.
Q: Can't search the IP address of the Raspberry Pi?
A: If using a network scanner, search a few more times. The most reliable
way is to log in to the gateway to find out if a Raspberry Pi is connected
to wifi. In addition, after the SD card has been run in the Raspberry Pi,