Addi-Data MSX-E3701-DIO Скачать руководство пользователя

Страница: 46 / 59

Acquisition modes

MSX-E3701-DIO

7.3.4

“Data server frame configuration” (supplementary data)

By default, only the acquisition values are sent to the client. However, it can also receive additional
information if you activate the following options.

Fig. 7-24: Data server frame configuration (Auto-refresh mode)

•

Send an absolute time stamp with the data:

A time stamp is sent, which contains the date of

the acquisition.

•

Convert the raw values into analog values:

With this option, the MSX-E system can convert

the raw values immediately to the correct unit. This unit depends on the system type. With an

MSX-E3701-DIO

, the unit is millimetres (mm). As the conversion affects the MSX-E CPU to a certain

extent, this can result in slower sending speed.

•

Invert the sign of the measured values:

It is possible to invert the sign of the measurement

value.

Fig. 7-25: Data server frame configuration (Sequence mode)

•

Send an absolute time stamp with the data:

A time stamp is sent, which contains the date of

the acquisition.

•

Send a relative time stamp with the data:

The date of the time stamp relates to the starting

point 0 of the acquisition.

•

Send the Sequence counter value with the data:

The value of the Sequence counter is sent.

In Sequence mode, all sequences are acquired so that the succession of these counter values is
complete (1, 2, 3, etc.).

•

Convert the raw values into analog values:

With this option, the MSX-E system can convert

the raw values immediately to the correct unit. This unit depends on the system type. With an

MSX-E3701-DIO

, the unit is millimetres (mm). As the conversion affects the MSX-E CPU to a certain

extent, this can result in slower sending speed.

•

Invert the sign of the measured values:

It is possible to invert the sign of the measurement

value.

www.addi-data.com 46

Содержание MSX-E3701-DIO




























































Результаты поиска

Содержание MSX-E3701-DIO

Отзывы:

Похожие инструкции для MSX-E3701-DIO

Бренды по названию

Популярные бренды

Addi-Data MSX-E3701-DIO, Техническое описание

Результаты поиска

Содержание MSX-E3701-DIO

Отзывы:

Похожие инструкции для MSX-E3701-DIO

Бренды по названию

Популярные бренды