Acquisition modes
MSX-E3701-DIO
7.2.1
“Channel configuration” (channel selection)
Fig. 7-6: Sequence mode: “Channel configuration”
You can define the acquisition order of the channels. This is displayed in the correspondent column as
soon as you have selected a channel. Each channel can be acquired only once per sequence.
Select the channels you want to acquire.
7.2.2
“Transducer selection”
Fig. 7-7: Sequence mode: “Transducer selection”
Select the connected transducer type.
7.2.3
“Delay” (wait time)
Fig. 7-8: Sequence mode: “Delay”
In the “Delay” section, you can define the wait time between the individual sequences. There are two
modes, which are explained below.
With “Delay”, you can define the value and the unit of the wait time (ms or s).
www.addi-data.com 35
