Acquisition modes
MSX-E3701-DIO
www.addi-data.com 34
The network client will not receive ten data packets with eight values in each packet, but only one
data packet with the average values from channels 1 to 8.
b) Acquisition per channel
Example:
The MSX-E system acquires channels 1 to 8. “Number of acquisitions” contains the value 10.
This means that each of the eight channels is acquired ten times.
Fig. 7-5: Auto-refresh mode: Acquisition per channel
After all of the eight channels have been acquired, the MSX-E system performs the following
calculation:
Average value of channel 1
= (value of channel 1 + value of channel 1 + … + value of channel 1) / 10
Average value of channel 2
= (value of channel 2 + value of channel 2 + … + value of channel 2) / 10
…
Average value of channel 8
= (value of channel 8 + value of channel 8 + … + value of channel 8) / 10
The network client will not receive eight data packets with ten values in each packet, but only one
data packet with the average values from channels 1 to 8.
7.2
Sequence mode
The Sequence mode enables you to acquire one or more channels. The acquisition can be started by a
trigger. There is a definable delay between the individual sequences.
On the web interface, from the menu on the left, select the item “Acquisition”, and on the right,
select the “Sequence” tab.
Channel 1
Example:
8 channels being acquired 10 times each
Ch3
Ch3
Ch3
Ch3
Ch3
Ch3
Ch3
Ch3
Channel 2
Channel 3
Channel 4
Channel 5
Channel 6
Channel 7
Channel 8
Ch3
Ch3
