ADC 150-2205-04, Инструкция по установке и проверке

Страница: 72 / 112

800-357-104-01, Revision 01
60 September 29, 2000 HMS-357 List 4 and List 5
HX
U
-3
5
7
Placing the Line Unit in Service at the HXU
The Wideband System 3190 interfaces internally to the 28 lines at the common DSX-1 point. Once a line has been
configured on the HLU, the DS1 interface at the HXU should be placed In-Service. Some alarm reporting will be
lost if the line is not placed In-Service.
The procedure to place a line unit in service varies by the type of multiplexer installed:
•
If you have an HXU-357—DS3, see “Placing the Line Unit in Service Using an HXU-357 Multiplexer”
below.
•
If you have an HXU-358—DS3 (T1/E1), see “Placing the Line Unit in Service Using an HXU-358
Multiplexer” on page 62 .
•
If you have an HXU-359—STS-1, see “Placing the Line Unit in Service Using an HXU-359 Multiplexer” on
page 64 .
•
If you have an HXU-369—OC-3, see “Placing the Line Unit in Service Using an HXU-369 Multiplexer” on
page 66 .
Placing the Line Unit in Service Using an HXU-357 Multiplexer
Step Procedure Installer Check
ü ü ü ü
The following procedure assumes proper TAO login.
For proper login procedure, please refer to
“Using the Terminal Access Option” on
page 27 .
1 Access the HXU-357 Root Menu from the Shelf Status menu by pressing and then the password.
H
2 Press to select DS1 Equip/Unequip and then press .
H
3 Enter the number of the channel line (or select all channel lines) and then press .
H
4 Press to select SET STATE TO (E)QUIPPED and then press .
H
5 Press to return to the Shelf Status menu.
H
6 Press to select Configuration Management and then press .
H
7 Press to select Service Mode and then press .
H
8 Press to select DS1 Service Mode and then press .
H
9 Enter the number of the channel line (or select all channel lines) and then press .
H
10 Press to select (I)N SERVICE and then press .
H
11 Press + to return to the Configuration Management menu.
H
12 Proceed to “Enabling Alarms for Systems Using an HXU-357 Multiplexer” on page 61 .
H
Installer Signature
? ? ? ?
Date
M
7 ENTER
ENTER
1 ENTER
ESC
1 ENTER
6 ENTER
2 ENTER
ENTER
1 ENTER
CTRL P