ADC 150-2205-04, Инструкция по установке и проверке

Страница: 50 / 112

Installing Multiplexers 800-357-104-01, Revision 01
38 September 29, 2000 HMS-357 List 4 and List 5
HXU-3
5
8
I
NSTALLING THE
HXU-358 M
ULTIPLEXER
C
ARD
Figure 22. Installing an HXU-358
Step Procedure Installer Check
ü ü ü ü
Whenever installing or removing units from the HMS-357 chassis, be sure to wear an
antistatic wrist strap and connect it to the ESD strap input.
1 If you have not already done so, unscrew the two hold-down lugs on each side of the chassis front
cover.
The cover folds down.
H
2 Plug your ESD strap into the ESD input on the front of the chassis.
H
3 Align the edges of the HXU-358 multiplexer card with the guide rails in the multiplexer tray.
H
4 Grasping the card eject tabs, gently push the card into the bay.
H
5 Firmly press in on the tabs until the card snaps into place.
H
6 Repeat Step 3 through Step 5 for the other HXU-358 multiplexer.
H
7 Proceed to “Setting Up Basic System Parameters Through the Config Menu” on page 39 .
H
Installer Signature
? ? ? ?
Date
MUX card
ESD strap input
Card eject tab