ADB Safegate RELIANCE, Руководство пользователя

Страница: 38 / 76

DANGER
Failure to follow these safety procedures can result in personal injury or death.
•
Allow only qualified personnel to install ADB SAFEGATE and auxiliary equipment. Use only approved equipment.
Using unapproved equipment in an approved system may void FAA approvals. Observe and follow the safety
instructions in this document and all other related documentation.
•
Make sure all equipment is rated and approved for the environment where it is being used.
•
Follow all instructions for installing components and accessories.
•
Install all electrical connections in compliance with local and national codes and regulations.
•
Use only electrical wire of sufficient gauge and insulation to handle the rated current demand. All wiring must
meet local and national codes.
•
Route electrical wiring along a protected path. Make sure it will not be damaged by moving equipment.
•
Protect components from damage, wear and harsh environmental conditions.
•
Allow ample clearance for maintenance, panel accessibility and cover removal.
•
Protect equipment with safety devices as specified by applicable safety regulations.
•
If safety devices must be removed for installation, reinstall them immediately after the work is completed and
check them for proper functioning.
•
The cord set must be protected prior to installation.
6.3 Basic Maintenance Program
There are recommended maintenance tasks to ensure that the equipment is in correct operating condition.
Maintenance Tasks
Weekly
•
Visual inspection of the light fixture.
•
Removal of dust from external surfaces of the light fixture.
Monthly
•
Check of the optical window, check for mechanical damage.
•
Check for proper fixing of the light fixture in its base.
Yearly
•
Detailed inspection of the light fixture.
•
Check of the body resistance, check for mechanical damage (for example cracks around prism windows).
•
Clean of the optical windows.
A daily function check is referred to in the document:
ICAO, Airport Services Manual Part 9, Airport Maintenance Practice and FAA AC 150/5340-26A,
Maintenance of airport visual aids facilities.
The light fixture is designed for outdoor operation, however storing the light fixture outside without using it is a risk for
damage to light fixture components. For a longer storage time (more than a week), it is recommended to store the light
fixture indoors in a dry and dust free environment and at room temperature. Proper storage ensures trouble free replacement
procedures. It is strongly recommended not to store any electrical equipment outside.
6.4 Workshop Maintenance
Remember
Before you start, make sure you have read and understand Safety instructions .
RELIANCE Omni Light
Maintenance
28
Copyright
©
ADB SAFEGATE, All Rights Reserved