ADB Safegate EREL, Руководство пользователя

Страница: 34 / 50

Install
1. Install the cooling block on the new body. See § Part replacement - cooling block .
2. Install the optical kit on the cooling block. See § Part replacement - optical kit .
3. Install the optical cover. See § Part replacement - optical cover .
4. Install the complete optical head. See § Part replacement - complete optical head
4.3.7 Part replacement - cooling block
Parts: See § Exploded view .
•
Cooling block
•
Cooling block gasket
•
Optical cover gasket
Tools:
•
Screwdriver, Torx T25
Remove - Step 1
1. Remove the complete optical head. See § Part replacement - complete optical head .
2. Put the complete optical head on a clean surface.
3. Make sure that the complete optical head is earthed. Connect the earth to the connector (A): PE. The PCBs will discharge.
4. Remove the optical cover. See §
Part replacement - optical cover .
5. Remove the optical kit. See § Part replacement - optical kit .
Remove - Step 2
1. Remove the cooling block screws (A) and washers (B).
2. Dispose of the cooling block screws and washers.
3. Remove the cooling block (C).
4. Remove the cooling block gasket (D).
5. Dispose of the cooling block gasket.
EREL / ERES
Maintenance
28
Copyright
©
ADB Safegate, All Rights Reserved