ADB Safegate EREL, Руководство пользователя

Страница: 32 / 50

Note
The arctic kit is supplied as a kit, complete with all components for replacement i.e. screws.
Tools:
•
Screwdriver, cross
Remove - Step 1
1. Remove the complete optical head. See § Part replacement - complete optical head .
2. Put the complete optical head on a clean surface.
3. Make sure that the complete optical head is earthed. Connect the earth to the connector (A): PE. The PCBs will discharge.
4. Remove the optical cover. See §
Part replacement - optical cover .
Remove - Step 2
1. Disconnect the connector (A).
2. Remove the arctic kit screws (B).
3. Remove the PCB of the arctic kit (C).
4. Remove the spacers (D).
5. Dispose of these parts:
a. arctic kit screws
b. PCB of the arctic kit
c. spacers
Install
1. Apply adhesive on the first three threads of the threaded holes of the cooling block. Use adhesive D. See § Options and
accessories .
2. Install the new spacers (A).
3. Install the new PCB of the arctic kit (B).
EREL / ERES
Maintenance
26
Copyright
©
ADB Safegate, All Rights Reserved