Adaptec 5325301656 - Snap Server 14000 NAS, Руководство администратора

Страница: 84 / 224

Configuring iSCSI Initiators
70 Snap Server Administrator Guide
6
Identify the specific volume you are expanding.
7
Enter:
select disk n
where n is the disk number that Diskpart indicated from the list command.
8
Enter:
select Volume n
where n is the volume number that Diskpart indicated from the list command.
9
Enter
extend size= n
where n is the number of megabytes you want to expand the disk.
For example, if you are adding 10 GBs to an existing disk of 100 GBs, use the
following command:
extend size=10240
(the number is in megabytes, 1024MBs = 1GB)
Note
The Disk Management GUI will show the newly expanded disk size.
10
Exit the Computer Management tool.
11
Restart the necessary application services.
Configuring the QLogic QLA4010 and QLA4050 iSCSI Initiators for
Microsoft Windows
QLogic's QLA4010 and QLA4050 are iSCSI adapters that appear as a SCSI adapter
instead of a network adapter in Windows Device Manager. Before the QLA4010 or
QLA4050 can successfully connect to iSCSI targets, you must:
• Set initiator parameters (for example, initiator name, alias, IP address).
• Enter target information (for example, target portal information and target iSCSI
name).
You can use either the SANSurfer Management application that came with the
QLA4010/4050 or Microsoft’s iSCSI initiator applet to set initiator parameters and
enter target information. Follow the instructions in the documentation to install
and configure the adapter.
iSCSI Configuration for Linux and UNIX
Before implementing iSCSI on Linux or UNIX systems, consider the following: