The Meaning of LED Indicators
Appendix C Troubleshooting Snap Servers
167
The LEDs operate as described in the following tables:
Disk Drive LEDs
Disk drive LEDs on these Snap Servers are located at the base of the bezel. The left
light indicates drive status. The right light indicates drive activity. They operate as
follows:
Power LED
Solid green
The server is powered on.
Off
The server is powered off.
System LED
Double-blink green
The server is booting up.
Triple-blink green
The server is shutting down.
Solid or blinking
amber at boot time
A problem was detected. The server will not boot.
Blinking amber
during normal
operation
A thermal or other system problem was detected
Blinking amber and
green
The server is in Maintenance Mode.
LAN 1 and LAN 2 LEDs
Solid green
The server is active and connected to the network on the
network port.
Off
The port is disconnected or the Ethernet cable is not connected
or linked to an active switch.
Status LED (left)
Activity LED (right)
Solid green
Off
Disk drive installed properly but is not active
Solid green
Blinking green
Disk drive installed properly and is active
Solid amber
Off
Disk drive installed, but not working correctly
Off
Off
No disk drive installed
Содержание 5325301656 - Snap Server 14000 NAS
