Adaptec 5325301656 - Snap Server 14000 NAS, Руководство администратора

Страница: 35 / 224

TCP/IP Options
Chapter 2 Network Access to the Server 21
TCP/IP Options
GuardianOS Snap Servers ship with Dual Gigabit Ethernet (GbE) ports.
Note
Exceptions to this are the Snap Server 110 and 210, which ship with a single
Gigabit Ethernet port.
The following table describes TCP/IP options; default settings appear in italics.
DNS Information
Domain Name The ASCII name that identifies the internet domain for a
group of computers within a network.
Primary DNS The IP address of the primary Domain Name System
server that maintains the list of all host names.
Secondary DNS #1 Secondary Domain Name System server #1
Secondary DNS #2 Secondary Domain Name System server #2
Option Setting Description
TCP/IP
Addressing DHCP By default, Snap Servers acquire an IP address from the
DHCP server on the network.
Static Administrators may assign a fixed IP address or other IP
settings as necessary.
Network
bonding
Note
Not
applicable to
Snap Server
110 or 210.
Standalone The default Standalone setting treats each port as a separate
interface, effectively disabling network bonding. Network
bonding treats two ports as a single channel for failover or load
balancing purposes.
Load
Balance
(ALB) An intelligent software adaptive agent repeatedly analyzes the
traffic flow from the server and distributes the packets based
on destination addresses, evenly distributing network traffic for
optimal network performance.
The Snap Server supports a server-side load balancing
implementation called ALB (Adaptive Load Balancing). Both
ports need to be connected to the same switch.
Note
Load balancing occurs only on Layer 3 routed protocols
(IP).