Adaptec 5325301656 - Snap Server 14000 NAS Скачать руководство пользователя страница 176

Страница: 176 / 224

The Meaning of LED Indicators

162 Snap Server Administrator Guide

Snap Server 410 Status and Drive Light Behavior

The server has two status lights, two network lights, and two lights for each of the

four disk drives, as shown in the following illustration:

Adaptec recommends that you become familiar with the operation of these lights.

Power, System, and LAN LEDs

These status lights are located to the right of the power button. Looking at the

server from the front, the lights appear in the following order, from left to right:

power LED, system LED, LAN 1 (Ethernet1) LED, and LAN 2 (Ethernet2) LED. The

Disk Drive LEDs run along the bottom of the bezel, two LEDs for each disk drive.
The LEDs operate as described in the following tables:

System LED

Power LED

LAN LEDs

Disk Drive LEDs

Power LED

Solid green

The server is powered on.

Off

The server is powered off.

System LED

Blinking green

The server is operating normally.

Blinking amber

A thermal or other system problem was detected.

Blinking amber and
green

The server is in Maintenance Mode.

Содержание 5325301656 - Snap Server 14000 NAS

































































































































































































































Результаты поиска

Содержание 5325301656 - Snap Server 14000 NAS

Отзывы:

Похожие инструкции для 5325301656 - Snap Server 14000 NAS

Бренды по названию

Популярные бренды

Adaptec 5325301656 - Snap Server 14000 NAS, Руководство администратора

Результаты поиска

Содержание 5325301656 - Snap Server 14000 NAS

Отзывы:

Похожие инструкции для 5325301656 - Snap Server 14000 NAS

Бренды по названию

Популярные бренды