Adaptec 5325301656 - Snap Server 14000 NAS, Руководство администратора

Страница: 48 / 224

DHCP Server
34 Snap Server Administrator Guide
DHCP Server
DHCP server settings are configured on the
Network > DHCP
screen of the
Administration Tool. To configure the Snap Server as a DHCP server, it must have a
static IP address. The DHCP server automatically uses the subnet of the IP address
you set up.
Ensure that the network has no other active DHCP servers. You may negatively
impact the network if you enable the Snap Server as a DHCP server while another
server on the network is performing this function.
When you enable the Snap Server as a DHCP server, it reports in-use IP addresses
at the bottom of the screen under Current DHCP Status.
Print Server
The Snap Server can be configured to emulate a Windows print server for locally-
attached USB printers. Client machines connect to the Snap Server over the network
and use the printer similarly to using a printer shared by a Windows or CUPS
server. You can pause or resume the printer, and monitor or cancel print jobs using
the Administration Tool.
Configuring your Snap Server as a print server is a two part process:
• Configure the printer on the Snap Server.
• Configure the client to print via the Snap Server.
Configuring the Printer on the Snap Server
1
Connect the printer to one of the USB ports on the Snap Server.
2
Power on the printer.
3
In the Snap Server’s Administration Tool, navigate to
Server > Printing
. A list of
currently defined USB printers is displayed. To add the new printer, click
Add
Local Printer
.
4
The Snap Server will detect the new printer and it should appear as an option in
the
Local Printer Device
dropdown list. Select that printer.
5
Give the printer a name, and complete Desciption and Location information as
desired. Click
OK
. The printer will appear in the list on the main printing page.