Adaptec 5325301656 - Snap Server 14000 NAS, Руководство администратора

Страница: 156 / 224

Off-the-Shelf Backup Solutions for the Snap Server
142 Snap Server Administrator Guide
4
Install the agent:
cd /shares/SHARE1/linux
./installralus
Follow the installation instructions, accepting the default options.
Note
During the installation process, you may see an error message about the
failure to add root to the beoper group. This error will be resolved in the following
step.
5
Add the user root to the group beoper manually:
cli group member add group-name=beoper user-name=root
6
Start the Backup Exec RALUS agent by rebooting the Snap Server either through
the Admin Tool (
Maintenance > Restart
), or by typing:
/etc/rc.d/init.d/VRTSralus.init start
7
Verify that using Backup Exec, you can create a job using the UNIX agent:
a
Create a Guardian Root login account on the Backup Exec server.
b
Connect as root (the password will be the same as the admin account
password).
c
Create a job and choose the Unix agent representing the Snap Server.
d
Verify that you can connect to the agent, configure a job, and run the job.
Uninstall the Backup Exec RALUS AGENT
1
To uninstall the RALUS Agent, you will need the tar or install directory that you
copied to the Snap Server when you installed the Agent (follow Steps 1 through 3
of Install Backup Exec RALUS Agent). Make sure you see the script
uninstallralus
2
Type:
./uninstallralus
Follow the prompts.
3
Verify that the Symantec RALUS agent has been uninstalled by typing the
following command:
rpm -qa | grep VRTS