Adam Equipment CFC SERIES, Руководство по обслуживанию

Страница: 7 / 22

3.0 ERROR CODES
ERROR CODE DESCRIPTION POSSIBLE CAUSES
Err 4
Initial Zero is greater than the
permissible value (typically 4%
of maximum capacity) when
power is turned on or when the
[Zero] key is pressed,
Weight on the pan when
turning the scale on.
Excessive weight on the pan
when zeroing the scale.
Improper calibration of the
scale.
Damaged load cell.
Damaged Electronics.
Err 5
Keyboard error. Improper operation of the
scale.
Err 6
A/D count is not correct when
turning the scale on. Platform is not installed.
Load cell may be damaged.
Electronics may be
damaged.
FAIL H
or
FAIL L
Calibration error Improper calibration.
If the problem persists
contact your dealer or Adam
Equipment for assistance.
@Adam Equipment Company 2007
5