Adam Equipment CFC SERIES, Руководство по обслуживанию

Страница: 9 / 22

5.0 CFC USER PARAMETERS
•
To set the parameters it is necessary to enter a secure menu.
This is done by entering a password number when
requested.
•
To enter the parameter menus press [Tare] during initial
counting of the display after power is turned on. The
“
WEIGHT ” Display will show "
PIn
" requesting the
password number to be entered.
•
The default password is " 0000 " but other numbers can be set
using the parameter menus.
•
Press the [0] key four times when the display shows "
PIn
- - -",
Press the [Tare] key again.
•
The following parameters can be accessed using the [M+]
key to cycle through the choices. The “ UNIT WEIGHT ”
display will show the name of the parameters. To enter a
parameter, press the
[Tare] key. At any time press the [Zero]
key to return to weighing.
Display Description
F1 CAL
See the calibration section for details.
F2 CAP
Selects the scale capacity.
Scroll through the available options using the
[M+] key. Press [Tare] to store
the value and return to menu.
F3 d
I
Sets the scale increment.
Press
[Tare] to enter to menu. Press [M+] to show the options (5, 10 and 20).
Press [Tare] to accept the selection and return to menu.
F4 Cnt
Displays the A/D counts.
Press
[Tare] to see the count. Pressing it again will return to menu.
F5 PIn
Sets a new password number. Press [Tare] . The “ UNIT WEIGHT ” display
will show "
Pin 1
"
Enter the new password number then press [Tare] .
Display will change to "
Pin 2
", Enter the password again and press [Tare].
The display will show "
donE
" to show the new password has been accepted
and will return to the menu. Record the new password in a secured place.
@Adam Equipment Company 2007
7