ACV EVO S 100 Скачать руководство пользователя страница 22

Страница: 22 / 154

EVO S

, Installation, Commisioning and Servicing Instructions

4. INSTALLATION

The boiler is delivered with:

- A plan for helping fix the boiler to the wall.

- Two mounting hooks.

- A 4 bar (models below 70 kW) or 6 bar (models above 80 kW) safety valve.

- A plastic funnel that is adapted to the safety valve.

- A siphon and a flexible hose for evacuating condensates.

- An information plate for the 40 to 120 kW models switching to propane gas.

- A gas adapter for the 70 to 120 kW models switching to propane gas.

4.1. Installing the boiler

IMPORTANT:

The boiler must not bear the weight of the accessories and connections

(hydraulics, gas, exhaust system, etc.).

WARNING :

The use of the fixing hooks supplied with the product or our supports

is mandatory.

Hooks (provided)

Figure 5 - Mounting with hooks (supplied)

Содержание EVO S 100



























































































































































Результаты поиска

Содержание EVO S 100

Отзывы:

ACV EVO S 100, Инструкции по установке, использованию и обслуживанию, Страница: 22 / 154

Результаты поиска

Содержание EVO S 100

Отзывы: