Rev. 1
HEXAPAD 10 BC USB
8.6 Switching Standalone mode to Transparent and vice versa
For changing the mode of operation of the reader the following options can be used:
A. Use the
readmode command
, examples:
a. The reader is in Standalone mode and the "
readmode transparent<CR>
" command is
sent, so the reader enters Transparent operation mode.
b. The reader is in transparent mode and the
$off<CR> command
is sent, so the reader
enters standalone mode with hid interface.
B. Use the "Caps Lock" key (Windows and Linux only), example:
a. Close any serial communication with the reader;
b. To switch between one operating mode and another, simply
quickly click the
CapsLock key 5 times in sequence
and check the reader's LEDs to see the change.
NOTE: When
in transparent mode, the reader does not echo the characters typed in the
serial terminal.
ALERT
:
The Caps Lock shortcut for switching the operating
mode only
works
if and only if the serial port of the reader is not connected (not being
used by any Software).
Содержание HEXAPAD 10
