Acumentrics Rugged-UPS 1252 Series, Руководство оператора

Страница: 19 / 31

Operator’s Guide for Rugged-UPS
TM
1252 Series
91-0120 Rev. B 19 © Acumentrics Corporation 2007-2008
UpsTrapAlarmEntry
upsTraps(2)
Added(3)
Trap This trap is sent each time an alarm is
inserted intoto the alarm table. It is
sent on the insertion of all alarms
except for upsAlarmOnBattery and
upsAlarmTestInProgress. Read
UpsTrapAlarmEntry upsTraps(2)
Removed(4)
Trap This trap is sent each time an alarm is
removed fromthe alarm table. It is
sent on the removal of allalarms
except for upsAlarmTestInProgress. Read
upsObjects(1).upsAlarm(6).upsWellKnownAlarms(3) upsAlarmOnBattery(2) OID The UPS is drawing power from the
batteries. Read
upsObjects(1).upsAlarm(6).upsWellKnownAlarms(3) upsAlarmLowBattery(3) OID The remaining battery run-time is less
than or equal to
upsConfigLowBattTime. Read
UpsAlarmDepleted upsObjects(1).upsAlarm(6).upsWellKnownAlarms(3)
Battery(4)
OID The UPS will be unable to sustain the
present load when and if the utility
power is lost. Read
upsObjects(1).upsAlarm(6).upsWellKnownAlarms(3) upsAlarmTempBad(5) OID A temperature is out of tolerance. Read
upsObjects(1).upsAlarm(6).upsWellKnownAlarms(3) upsAlarmInputBad(6) OID An input condition is out of tolerance. Read
upsObjects(1).upsAlarm(6).upsWellKnownAlarms(3) upsAlarmOutputBad(7) OID An output condition (other than
OutputOverload) isout of tolerance. Read
UpsAlarmOutput upsObjects(1).upsAlarm(6).upsWellKnownAlarms(3)
Overload(8)
OID The output load exceeds the UPS
output capacity. Read
UpsAlarmOutputOff upsObjects(1).upsAlarm(6).upsWellKnownAlarms(3)
AsRequested(11)
OID The UPS has shutdown as requested,
i.e., the output is off. Read
UpsAlarmUpsOff upsObjects(1).upsAlarm(6).upsWellKnownAlarms(3)
AsRequested(12)
OID The entire UPS has shutdown as
commanded. Read
UpsAlarmUpsOutput upsObjects(1).upsAlarm(6).upsWellKnownAlarms(3)
Off(14)
OID The output of the UPS is in the off
state. Read
UpsAlarmUpsSystem upsObjects(1).upsAlarm(6).upsWellKnownAlarms(3)
Off(15)
OID The UPS system is in the off state. Read
upsObjects(1).upsAlarm(6).upsWellKnownAlarms(3) upsAlarmGeneralFault(18) OID A general fault in the UPS has been
detected. Read