Operator’s Guide for Rugged-UPS
TM
1252 Series
91-0120 Rev. B 7
© Acumentrics Corporation 2007-2008
(Continuation…)
WARNINGS
•
The batteries will eventually become too weak to provide rated autonomous operation. To obtain
battery replacement or repair service, please call the Customer Service telephone number written on
the back cover of this manual for information on the Service Center nearest you.
•
Do NOT smoke near batteries. Sparks, flames or other sources of ignition may cause a battery
explosion.
•
Use gloves and wear protective eye equipment whenever working with batteries.
•
When replacing the Battery Pack, ensure the connectors located in the rear of the battery pack do
NOT come in contact with any metals, liquids, etc. a risk of electrical shock and high short circuit
current may exist.
•
A battery can present a risk of electrical shock and high short circuit current. When replacing
batteries, wrist watches and jewelry such as rings should be removed. Use tools with insulated
handles.
How to use this
Manual
The
Rugged-UPS
1252
Operator’s Guide provides information operators need for safe and effective
use and care of the
Rugged-UPS
1252
products. It is important that all persons using this product read
and understand all the information contained within.
This manual is written for users who will be using the
Rugged-UPS
1252
for AC Input, optional DC
Input, AC Output, optional DC Output, with Battery Pack, (ACG1252R-18B). Features (options) that are
present in this manual that do
NOT
correspond with your device should be disregarded.
Please read thoroughly the Safety Considerations and Warning Section.
Manual Updates
Acumentrics Corporation provides manual updates to inform customers of changes in device information
and use. The updates will be available at the Acumentrics website
www.acumentrics.com
.
All users should carefully review each manual update to understand its significance and then file it in its
appropriate section within this manual for subsequent reference.
Unpacking
Carefully inspect each container for damage. If damage is sustained during transit it is not covered under
warranty. If the shipping container or cushion material is damaged, it should be kept until the contents
have been checked for completeness and the unit has been checked for mechanical and electrical
integrity. If the contents are incomplete, if there is mechanical damage, or if the instrument does not pass
its electrical test, customers should contact Customer Service at Acumentrics Corporation (800)-332-
0277.
Optional
Accessories
•
ACG9012 Rack mount kit for standard 19” cabinets with depths from 20” - 26”
•
ACG9200 10’ AC input cable w/ pigtails
•
ACG9201 AC output cable
•
ACG9202 DC Input cable
•
ACG18BP Full Battery Pack
•
ACG1252XRBP Extended run battery chassis
•
ACG1UBP 1U high extended run battery chassis
*NOTE: If damage is caused by third party cables the warranty is void.