87
Operation
LipuSmart-P
EN
4.2.2 Settings in the menu
Settings in several menu items can only be made in Service mode and should be agreed with ACO
Service.
)FÏNOÏENTRYÏISÏMADEÏWITHINÏÏSECONDSÏTHEÏDISPLAYÏAUTOMATICALLYÏSWITCHESÏBACKÏTOÏTHEÏBASICÏSETTING
Run time and pump cycles can be displayed but not changed.
Î
3ELECTÏTHEÏMENUÏITEMSÏTOPÏLINE Ï!CTIVATEÏTHEÏROTARYÏSWITCHÏ@DISPLAY
Î
#HANGEÏSETTINGSÏBOTTOMÏLINE
■
0RESSÏTHEÏh!CKNOWLEDGEÏSELECTIONvÏBUTTONÏBRIEmYÏ4HEÏMOSTÏRECENTLYÏSAVEDÏSETTINGÏBEGINSÏ
TOÏmASH
■
4URNÏTHEÏ@DISPLAYÏROTARYÏSWITCHÏTURNÏFASTÏFORÏAÏGENERALÏSETTINGÏTURNÏSLOWLYÏFORÏlNEÏSETTING
Î
#ONlRMÏSETTINGÏ0RESSÏTHEÏh!CKNOWLEDGEÏSELECTIONvÏBUTTONÏBRIEmY
Explanation of the menu items
Menu items
(top line)
Settings
(bottom line)
Explanation
Baseload ON
0 – 200 cm
!CTIVATIONÏPOINTÏFORÏlRSTÏPUMPÏ
Baseload OFF
0 – 200 cm
3WITCHOFFÏPOINTÏFORÏlRSTÏPUMPÏ
0EAKÏLOADÏ/.
0 – 200 cm
Activation point for additional pump
0EAKÏLOADÏ/&&
0 – 200 cm
3WITCHOFFÏPOINTÏFORÏADDITIONALÏPUMP
High water level
0 – 200 cm
High water level alarm if exceeded
Run. Time max.
0 – 60 min
6ALUEÏ@ÏDEACTIVATESÏTHEÏFUNCTIONÏ)FÏTHEÏPUMPÏISÏ
OPERATEDÏWITHOUTÏINTERRUPTIONÏTHEÏSYSTEMÏSHUTSÏDOWNÏ
automatically after the set stop delay.
The pump does not start up again until the defect
HASÏBEENÏACKNOWLEDGED
Run time altern.
deactivated
1 – 60 min
The pump changeover is after the set time in the
basic load mode. After three changes without
interruption the High water level alarm is also
TRIGGEREDÏANDÏTHEÏ@2UNNINGÏTIMEÏALTERNÏMESSAGEÏ
appears in the display.
$ELAY
0 – 900 s
!FTERÏAÏMAINSÏFAILUREÏSTAGGEREDÏSTART ÏTHEÏPUMPSÏDOÏ
not start until the set time has expired. The remaining
time is shown in the display.