78
Installation
LipuSmart-P
Pressure line specifications:
4HEÏLIFTINGÏPLANTÏMUSTÏBEÏDRAINEDÏVIAÏAÏBACKmOWÏLOOPÏ4HEÏBACKmOWÏLOOPÏMUSTÏBEÏESTABLISHEDÏ
ABOVEÏTHEÏBACKmOWÏLEVEL
$ElNITIONÏOFÏTERMSÏASÏPERÏ%.Ï
■
h"ACKmOWvÏ&LOWÏOFÏWASTEWATERÏFROMÏAÏDRAINÏORÏSEWERÏAGAINSTÏTHEÏDIRECTIONÏOFÏmOWÏBACKÏINTOÏ
the connected conduit.
■
h"ACKmOWÏLEVELhÏ4HEÏMAXIMUMÏLEVELÏTOÏWHICHÏWASTEWATERÏCANÏRISEÏWITHINÏAÏDRAINAGEÏSYSTEM
■
h"ACKmOWÏLOOPvÏ0ARTÏOFÏTHEÏPRESSUREÏLINEÏFROMÏAÏWASTEWATERÏLIFTINGÏPLANTÏABOVEÏBACKmOWÏLEVEL
3PECIlCATIONS
■
)NSTALLÏTHEÏBACKmOWÏLOOPÏABOVEÏTHEÏ
hBACKmOWÏLEVELvÏ
▼
.
■
The pressure line must be designed for at least 1.5 times the pump pressure.
■
Install the pressure line so that it rises continuously and is frost resistant.
■
4HEÏmOWÏVELOCITYÏINÏTHEÏPRESSUREÏLINEÏMUSTÏNOTÏFALLÏBELOWÏÏMSÏANDÏMUSTÏNOTÏEXCEEDÏÏ
MS
■
Never connect other conduits to the pressure line.
■
Ventilation valves are not allowed in the pressure line.
■
The pressure line may not stand up in the special mounting adapter.
Ventilation line specifications:
■
Install the ventilation line up to above the roof. Ventilate connection lines longer than 5 m
separately.
■
If the inlet line above the system does not have a separate ventilation connection line longer
THANÏÏMÏITÏMUSTÏBEÏEQUIPPEDÏWITHÏANÏADDITIONALÏVENTÏSTACKÏASÏCLOSEÏASÏPOSSIBLEÏTOÏTHEÏ
system.
■
)NSTEADÏOFÏANÏADDITIONALÏCONNECTIONÏINÏTHEÏINLETÏLINEÏNEARÏTHEÏSYSTEMÏAÏCONNECTIONÏPORTÏONÏTHEÏ
grease separator can be used.
■
6ENTILATIONÏVALVESÏAREÏNOTÏPERMITTEDÏINÏAREASÏATÏRISKÏOFÏBACKmOWÏORÏFORÏVENTILATINGÏTHEÏSYSTEM
■
)NSTALLÏVENTILATIONÏLINESÏMADEÏOFÏMATERIALSÏRESISTANTÏTOÏFATTYÏACIDÏEGÏ+-,Ï00Ï0%