Acer RS700 Скачать руководство пользователя страница 70

Страница: 70 / 79

Chapter 6

Manageability

Acer RAID Manager

•

Allows you to control and monitor RS700 RAID Storage, either from a
local host, or from a remote station connected through a LAN, telephone
line, or the Internet.

•

GUI running under Windows NT/Win 95/Win 98.

•

Supports remote management over the network of host/agents running
Windows NT or Windows 95/98 via the SNMP.

•

Provides innovative, user-configurable event notification functions.

Please refer to the Acer RAID Manager’s manual for more information.

Advanced Server Manager (ASM)

•

ASM is composed of two major components: ASM Agent (for servers)
and ASM Station (for any Windows workstation).

•

ASM Agent gathers information from the network servers and then
passes the data to ASM Station for analysis and display.

•

ASM Station monitors the agent server system and warns of potential
danger to prevent system malfunction and breakdown.

Please refer to Advanced Server Manager user’s guide for more information.

Содержание RS700
















































































Результаты поиска

Содержание RS700

Отзывы:

Похожие инструкции для RS700

Бренды по названию

Популярные бренды

Acer RS700, Руководство по установке

Результаты поиска

Содержание RS700

Отзывы:

Похожие инструкции для RS700

Бренды по названию

Популярные бренды