![background image](http://html1.mh-extra.com/html/acer/g330-altos-1-gb-ram/g330-altos-1-gb-ram_configuration-manual_4044793083.webp)
73 Altos G330 Installation Configuration Guide
Software Required
The management utility of onboard LSI SATA RAID will be included in the
EasyBUILD 7.1 build 600 (or later).
Software
Version
Directory on EasyBUILD
Onboard LSI SATA
RAID monitor utility
7.29
The utility will be included in the
EasyBUILD 7.1 build 600 or later. You
can find the utility on GCSD website,
too.
http://csd.acer.com.tw
Configuring onboard LSI SATA RAID
Please refer to the Appendix B. for the onboard LSI SATA RAID configuration.
Installation Tips
1.
Download and make the driver disks for onboard LSI SATA RAID and
82573E Gigabit Ethernet.
2.
Boot the system from the NetWare 6.5 Support Pack 6 OS CD.
3.
At Welcome to the NetWare 6.5 server installation page, select Manual to
install.
4.
At Prepare boot partition page, create one 500 MB DOS partition.
5.
When you see the following message, please select Modify. Move the
cursor to Storage adapters and press Enter.
The following device drivers were detected for this
server. Add, change, or delete device drivers as
needed.
Device types Driver names
------------------------- ----------------------------
HotPlug Support Module: (optional)
Storage adapters: IDEATA ADPAHCI
6.
After you pressing the Enter, you would see the storage adapter detected
by NetWare 6.5 Support Pack 6. Please move cursor to ADPAHCI.HAM and
press Delete to remove the driver.
Add, edit, or delete storage drivers. Each
controller/adapter requires a driver.
Driver name Device Name Stat
------------ ------------------------------- ----
IDEATA.HAM Standard ATA/IDE/ATAPI Adapter
ADPAHCI.HAM Adaptec ICH 7R RAID Controller
7.
To apply the driver for onboard LSI SATA RAID, please press INSERT key