Altos G330 Installation Configuration Guide
42
11.
Select Source under Development in the left window and check kernel-
source in the right window to add kernel-source.
12.
After you add the kernel-source and C/C++ Compiler and Tools, please
click on Accept and follow the instruction to complete the installation.
Gigabit Ethernet Driver Installation
The SUSE Linux Enterprise Linux 10 could detect the onboard Intel 82573E
automatically. We still recommend replacing the driver with the one in
EasyBUILD 7.1 build 600 (or later).
1.
Remove the module e1000
# rmmod e1000
2.
Make the driver diskette for EasyBUILD 7.1 build 600 (or later).
3.
Copy driver from floppy to hard disk
# mount /media/floppy
# cp –R /media/floppy/. /tmp/
4.
Change the directory to the driver source and install the driver
# cd /tmp/src/
# make install
# insmod e1000.ko
Onboard SATA RAID Utility Setup
1.
Copy the utility Spy.i386.rpm from the EasyBUILD build 600 (or later) to
HDD. Please refer to the Software Required section to find the utility in
the EasyBUILD.
2.
Install the Spy.i386.rpm
# rpm –ivh Spy.i386.rpm
SUSE Linux Enterprise Server 10 Installation (with Adaptec SAS
44300 HostRAID)
Below information describes how to manually install SUSE Linux Enterprise
Server 10 on Altos G330 with add-on Adaptec SAS 44300 HostRAID.
Drivers Required
For SUSE Linux Enterprise Server 10 Installation, the following device drivers are
required. These drivers can be found in EasyBUILD 7.1 build 600 (or later)
Device
Version
Directory on EasyBUILD
Onboard ATI
ES1000
N/A OS
built-in
Onboard Intel 3000
N/A
No Driver
