Altos G330 Installation Configuration Guide
8
location in the search.
6.
Click on Browse and specify the path for the driver. Please refer to the
Directory on Resource CD in Driver required section for the path for the
NIC.
7.
Click on Next and follow the instruction to finish the driver update.
8.
After installing the driver, you would see Intel(R) PRO/1000 PM Network
Connection with I/O Acceleration listed in Network adapters.
iAMT Driver Installation
1.
After you installing all the drivers, there are still two devices name PCI
Device and PCI Serial Port listed in Other devices in Windows Device
Manager. They are the onboard iAMT device. You can find the driver in
G330 Resource CD. Please do the same on both of the devices.
2.
Right-click on the PCI Device/PCI Serial Port and select Update Driver.
3.
Select No, not this time. Do not connect to Windows Update to search the
driver.
4.
Select Install from a list or specific location (Advanced).
5.
Select Search the best driver these locations and check Include this
location in the search.
6.
Click on Browse and specify the path for the driver. Please refer to the
Directory on G330 Resource CD in Driver required section for the path for
the onboard iAMT.
7.
Click on Next and follow the instruction to finish the driver update.
8.
After you installing the driver for both of PCI Device and PCI Serial Prot,
you would see only one Intel(R) Active Management Technology – SOL
(COM3) listed in Ports (COM & LPT) in Windows Device Manager.
Matrix Storage Manager Utility Installation
1.
Please insert the G330 Resource CD into the optical drive.
2.
Select Utilities, expand Utilities -> Altos G330 -> Onboard Intel SATA RAID,
select Matrix Storage Manager (Windows Server 2003 x64) and click on
Setup.
3.
Follow the instruction to install the RAID utility installation and reboot
the server after the utility is installed.
Intel PROSet Utility Installation
1.
Please insert the G330 Resource CD into the optical drive.
2.
Select Utilities, expand Utilities -> Altos G330 -> Intel Gigabit Ethernet
Controller, select PROSet Utility (Windows Server 2003 x64) and click on
Setup.
