Altos G330 Installation Configuration Guide
36
Red Hat Enterprise Linux 4.0 EM64T Update 3 (with onboard LSI
SATA RAID)
Below information describes how to manually install Red Hat Enterprise Linux
4.0 Update 3 EM64T on Altos G330 with onboard LSI SATA RAID.
Drivers Required
For Red Hat Enterprise Linux 4.0 Update 3 EM64T Installation, the following
device drivers are required.
Device
Version
Directory on Resource CD
Onboard ATI
ES1000
N/A OS
built-in
Onboard Intel 3000
Chipset
N/A No
Driver
Onboard LSI SATA
RAID
5.09a \Disk\G330\raid\LSI\rhe4u3
Onboard Intel
82573E Gigabit
Ethernet
7.2.7-NAPI \Disk\G330\NIC\Intel\pro1000.lx
Onboard USB 2.0
N/A
OS built-in
Software Required
The management utility of onboard LSI SATA RAID can be found in the G330
Resource CD build 100 (or later)
Software
Version
Directory on Resource CD
Onboard SATA
RAID Monitor
Utility
1.11.0 \APP\G330\SATARAID\Monitor\linux\
Configuring onboard LSI SATA RAID
Please refer to the Appendix B. for the onboard LSI SATA RAID configuration.
Installation Tips
1.
Since Red Hat Enterprise Linux 4.0 Update 3 EM64T cannot recognize the
onboard LSI SATA RAID, you need to make a driver diskette from the
Resource CD first before the installation.
2.
Type linux dd when the prompt boot: appears at the start.
3.
Follow the instruction to load onboard LSI SATA RAID driver from the
driver diskette from floppy (fd0).
4.
At Package Installation Defaults page, select Customize the set of
packages to be installed. And select Development Tools under
Development in the
Package Group Selection.
5.
Follow the normal procedure to finish the installation.
