![background image](http://html1.mh-extra.com/html/acer/g330-altos-1-gb-ram/g330-altos-1-gb-ram_configuration-manual_4044793079.webp)
69 Altos G330 Installation Configuration Guide
5.
During the installation, you would see the default Platform Support
Modules would be set to MPS14 as following. You need to update it to
ACPI with ACPI PSM module update patch after OS installation completed.
The following device drivers were detected for this
server. Add, change, or delete device drivers as
needed.
Device types Driver names
------------------------- --------------
Platform Support Module: MPS14
6.
When you see the following message, please select Modify. Move the
cursor to Storage adapters and press Enter to apply the driver for Adaptec
SAS 44300.
The following device drivers were detected for this
server. Add, change, or delete device drivers as
needed.
Device types Driver names
------------------------- ----------------------------
HotPlug Support Module: (optional)
Storage adapters: IDEATA IDEATA IDEATA
7.
After you pressing the Enter, you would see the storage adapter detected
by NetWare 6.5 SP5.
Add, edit, or delete storage drivers. Each
controller/adapter requires a driver.
Driver name Device Name Stat
------------ ------------------------------- ----
IDEATA.HAM Standard ATA/IDE/ATAPI Adapter
IDEATA.HAM Standard ATA/IDE/ATAPI Adapter
IDEATA.HAM Standard ATA/IDE RAID Adapter
8.
Please press INSERT key twice, insert the driver disk for Adaptec SAS
44300 into floppy and press Enter. It will show the driver on the disk as
following. Please press Enter again to select the driver to install.
Select a driver to install:
-----------------------------------------------
ADP94XX.HAM Adaptec HostRAID SAS/SATA Driver
9.
When you see the following message to ask you to verify/enter the driver
properties, just select Return to driver list.
Verify/Enter the driver properties so that they match
the hardware in this server