Altos G330 Installation Configuration Guide
38
Adaptec SAS 44300
1.2.5918.0
\Disk\G330\SAS\Adaptec\x64\44330.rl
Onboard Intel
82573E Gigabit
Ethernet
7.2.7-NAPI \Disk\G330\NIC\Intel\pro1000.lx
Onboard USB 2.0
N/A
OS built-in
Software Required
The management utility of Adaptec SAS 44300 HostRAID can be found in the
G330 Resource CD build 100 (or later).
Software
Version
Directory on Resource CD
Adaptec Storage
Manager
4.30.01(16042
)
\APP\G330\SAS\Adaptec\x64\linux\
Configuring Adaptec SAS 44300 HostRAID
Please refer to the Appendix C. for the Adaptec SAS 44300 HostRAID
configuration.
Installation Tips
1.
Since Red Hat Enterprise Linux 4.0 Update 3 EM64T cannot recognize the
Adaptec SAS 44300, you need to make a driver diskette from the Resource
CD first before the installation.
2.
Type linux dd when the prompt boot: appears at the start.
3.
Follow the instruction to load Adaptec SAS 44300 driver from the driver
diskette from floppy (fd0).
4.
At Package Defaults page, select Customize the set of packages to be
installed. And select Development Tools under Development in the
Package Group Selection.
5.
Follow the normal procedure to finish the installation.
Gigabit Ethernet Driver Installation
The Gigabit Ethernet Driver installation is the same as onboard LSI SATA RAID
enabled. Please refer to the Red Hat Enterprise Linux 4 EM64T Update 3 (with
onboard LSI SATA RAID) Gigabit Ethernet Driver Installation section.
Adaptec Storage Manager Installation
1.
Insert the G330 Resource CD and copy the utility StorMan-
4.30.x86_64.rpm from the folder /APP/G330SAS/Adaptec/Linux on the CD
to HDD.
2.
Install StorMan-4.30.x86_64.rpm.
# rpm –ivh StorMan-4.30.x86_64.rpm
3.
Launch the Adaptec Storage Manager
# /usr/StorMan/StorMan.sh
