57 Altos G330 Installation Configuration Guide
SUSE Linux Enterprise Server 9 Service Pack 3 (with onboard LSI
SATA RAID)
Below information describes how to manually install SUSE Linux Enterprise
Server 9 Service Pack 3 on Altos G330 with onboard LSI SATA RAID.
Drivers Required
For SUSE Linux Enterprise Server 9 Service Pack 3 Installation, the following
device drivers are required.
Device
Version
Directory on Resource CD
Onboard ATI
ES1000
N/A OS
built-in
Onboard Intel 3000
Chipset
N/A No
Driver
Onboard LSI SATA
RAID
5.09a \Disk\G330\raid\LSI\sles9sp3
Onboard Intel
82573E Gigabit
Ethernet
7.2.7-NAPI \Disk\G330\NIC\Intel\pro1000.lx
Onboard USB 2.0
N/A
OS built-in
Software Required
The management utility of onboard LSI SATA RAID can be found in the G330
Resource CD build 100(or later).
Software
Version
Directory on Resource CD
Onboard SATA
RAID Monitor
Utility
1.11.0 \APP\G330\SATARAID\Monitor\linux\
Configuring onboard LSI SATA RAID
Please refer to the Appendix B. for the onboard LSI SATA RAID configuration.
Installation Tips
1.
Since SUSE Linux Enterprise Server 9 Service Pack 3 cannot recognize the
onboard LSI SATA RAID, you need to make a driver diskette from the
G330 Resource CD build 100 first before the installation.
2.
Boot the system form SUSE Linux Enterprise Server 9 Service Pack3
bootable CD.
3.
When you see the boot menu on the screen, press F6, select Installation
then press Enter to continue.
4.
Follow the instruction to load the onboard LSI SATA RAID driver from the
driver diskette.
5.
After loading the driver, select Back to return the installation procedure.
