65 Altos G330 Installation Configuration Guide
Installation Tips
1.
Since SUSE Linux Enterprise Server 9 EM64T Service Pack 3 cannot
recognize the Adaptec SAS 44300 HostRAID, you need to make a driver
diskette from the G330 Resource CD build 100 first before the installation.
2.
Boot the system form SUSE Linux Enterprise Server 9 EM64T Service Pack3
bootable CD.
3.
When you see the boot menu on the screen, press F6, select Installation
then press Enter to continue.
4.
Follow the instruction to load the onboard LSI SATA RAID driver from the
driver diskette.
5.
After loading the driver, select Back to return the installation procedure.
6.
Follow the instruction to change the CD to SUSE Linux Enterprise Server 9
EM64T CD #1.
7.
Continue to follow the instructions to the Installation Settings
8.
At the Installation settings, select the Software and click on Detailed
selection.
9.
Check C/C++ Compiler and Tools in the left window to add C/C++ compiler
tools.
10.
Select Various Linux Tools in the left window and check kernel-source in
the right window to add kernel-source.
11.
After you add the kernel-source and C/C++ Compiler and Tools, please
click on Accept and follow the instruction to complete the installation.
Gigabit Ethernet Driver Installation
The Gigabit Ethernet Driver installation is the same as onboard LSI SATA RAID
enabled. Please refer to the SUSE Linux Enterprise Server 9 EM64T Service Pack
3 (with onboard LSI SATA RAID) Gigabit Ethernet Driver Installation section.
Adaptec Storage Manager Installation
1.
Insert the G330 Resource CD and copy the utility StorMan-
4.30.x46_64.rpm from the folder /APP/G330SAS/Adaptec/Linux on the CD
to HDD.
2.
Install StorMan-4.30.x86_64.rpm.
# rpm –ivh StorMan-4.30.x86_64.rpm
3.
Launch the Adaptec Storage Manager
# /usr/StorMan/StorMan.sh
