25 Altos G330 Installation Configuration Guide
(Recommended) and click on Next.
5.
Check on the Specify a location and click on Next to specify the path for
the driver. Please refer to the Directory on Resource CD in Driver required
section for NIC driver.
6.
Follow the instructions to finish the installation.
7.
After installing the driver, you would see Intel(R) PRO/1000 PM Network
Connection listed in Network adapters.
iAMT Driver Installation
1.
After you installing all the drivers, there are still two devices name PCI
Device and PCI Serial Port listed in Other devices in Windows Device
Manager. They are the onboard iAMT device. You can find the driver in
G330 Resource CD. Please do the same on both of the devices.
2.
Right-click on the PCI Device/PCI Serial Port and select Properties.
3.
Select Driver tab and click on Update Driver.
4.
Follow the instructions. Select Search for a suitable driver for my device
(Recommended) and click on Next.
5.
Check on the Specify a location and click on Next to specify the path for
the driver. Please refer to the Directory on Resource CD in Driver required
section for IOAT driver.
6.
Follow the instruction to finish the driver update.
7.
After you installing the driver for both of PCI Device and PCI Serial Prot,
you would see Intel(R) Active Management Technology – KCS listed in
System devices and Intel(R) Active Management Technology – SOL (COM3)
listed in Ports (COM & LPT) in Windows Device Manager.
Matrix Storage Manager Utility Installation
1.
Please insert the G330 Resource CD into the optical drive.
2.
Select Utilities, expand Utilities -> Altos G330 -> Onboard Intel SATA RAID,
select Matrix Storage Manager (Windows 2000) and click on Setup.
3.
Follow the instruction to install the RAID utility installation and reboot
the server after the utility is installed.
Intel PROSet Utility Installation
1.
Before you installing the PROSet Utility, you need to enable the Windows
Instrumentation service first.
2.
Please launch the service management console form Start ->
Administrative Tools -> Service.
3.
Right-click on Windows Management Instrumentation service and select
Properties.
