AccuEnergy AcuRev 2000, Руководство пользователя

Страница: 87 / 270

79
c) If either one is not used, you can set the corresponding channel is not displayed (i.e.:
remove allowed to display on the hook)
CT model as follows:
When using EM modules: Different channels can access different types transformers, as
required by the customer can be independently set.
For example: The first one username Jack01, wiring is 3LN, the first channel phase
(composed by the channel 1,4,7); following settings the # 1 users change the name of
Jack01, the corresponding channel is set to 301/201 , check allows the display, the user's
wiring phase change 3LN.
Note: after the setup, "Update Device" must be clicked in order to send the settings to the
meter. All the other setting operations should follow this as well.
4.1 Basic Parameter Functions
The basic parameters measured in the AcuRev 2000 are voltage, current, power, etc. Th
e base module only displays power, including sytem power, inline A, B, C power, and each
tenant's power. Different wiring methods lead to different displays. The following figure is
the display of baisc parameter measurement (take the first one 3LN wiring for instance).