V: 1.0 Revised: May. 2019
31
Chapter 6: AcuLink 810 User interface
Alternatively users can also delete a device from the gateway by clicking on the device from
the 'Modbus Device' page, and then selecting the 'Configuration' tab.
6.5 Alarms
The AcuLink 810 supports alarm monitoring on the Modbus devices connected to it. The
gateway allows users to monitor selected parameters using an under/over alarm. When the
monitored parameter goes over/under the preset limit, the alarm will be triggered.
6.5.1 How to create alarm
To create an alarm, click on 'Modbus Devices' under the 'DEVICES' menu on the left panel.
Select the desired device you want to set the alarm for.
On the Device page, select the 'Alarms' tab. Click on 'Add Alarm'.
www.
.com
1.800.561.8187
