V: 1.0 Revised: May. 2019
39
Chapter 6: AcuLink 810 User interface
• SSID:
Users can create an SSID for the gateway, which will be used when other devices
connect.
• Network Key:
Users can create a network key
• IP:
Users can also enter in an IP address that will be used to access the meter while in Ac-
cess Point Mode.
NOTE:
The default Network Key is accuenergy, and the default IP address is 192.168.100.1
2. Station Mode: Where the AcuLink 810 joins an existing WIFI network.
• SSID:
Users can select from the list of wireless networks in range of the AcuLink 810.
• Network Key:
Network key of the selected wireless network must be entered in this set-
ting.
• DHCP:
Can be set to 'Manual' or 'Auto', where if 'Manual' is selected the Subnet Mask and
Gateway will also need to be provided. If 'Auto' is selected the AcuLink will have an IP ad-
dress automatically assigned. With this selection the Subnet Mask, Gateway and will also
be automatically assigned.
• Interface Status:
Will notify the user whether the AcuLink is connected or disconnected
to the WIFI network.
www.
.com
1.800.561.8187
