AccuEnergy AcuDC 210 Series, Руководство пользователя

Страница: 54 / 85

44
AcuDC 210/220 Series
The eighth screen: Energy clear page. It
displays “CLE” and a digit at the same time.
No change will be made if the digit is set to 0.
Energy will be reset after pressing V/A if the
digit is set to 1.
The ninth screen: Backlight "ON" time setting
page. The LCD display backlight will turn "OFF"
after inactive for a period of time to conserve
energy. The "ON" time can be set from 0 to
120 minute. The backlight will always be "ON"
if the setting value is 0. As in fig 3.16, the setting
time of the backlight is 5 minutes. The backlight will automatically turn "OFF" if no
key activation within 5 minutes.
Fig 3.16 Back light “ON” time
Fig 3.15 Energy clear page
Kwh
Fig 3.17 Voltage Hall Effect Sensor setting
The tenth screen: this screen will only be
visible when the meter voltage wiring is via
voltage Hall Effect Sensor. Otherwise, this
screen will not exist. The voltage input range is
0~1200Vdc. Fig 3.17 shows the voltage input is
1000V.