background image

50

ACCU 12

2

0

Operations

Operator’s Manual

5.4.2-7

5.4.2-8

5.4.2-9

Step 6:

Minimization completed (Figure 5.4.2-7):

Exit Minimization Mode.

Minimization to be continued (Figure 5.4.2-8):

Rotate the wheel until “888” is displayed.

Double mark the tire at the 12 o’clock position.

Remove the wheel from the unit.

Use a tire changer to rotate the tire so that the

double mark is in line with the valve.

Mount the wheel on the balancer.

Select the “F” key.

Step 7 (Figure 5.4.2-2):

Rotate the valve to the 12 o’clock position.

Select the “F” key.

Step 8 (Figure 5.4.2-3):

Spin the wheel.

Step 9 (Figure 5.4.2-9):
The unit will display the result:
- - -

Minimization successfully completed

EEE Minimization failed.

5.4.2

Weight Unit Toggle Mode.

Default weight setting: ounces.

Select this mode to change the unit of measurement
for the weight, before or after spinning the wheel.

Hold down the “

F

” key and press the “

Gr/Oz

” key.

Repeat the procedure to switch back to ounces.

5.4.3

Dimensions Unit Toggle Mode.

Default diameter and width unit of measurement:
inches.

Hold down the “

F

” key and press the “mm-inch”

key
Repeat the procedure to switch back to inches.

Содержание 1220

































































































Отзывы: