RECOMMENDED WATER:
DISTILLED OR PURIFIED BOTTLED WATER
1. Remove the pressure pot from the back of the machine.
2.
2.Open the pot and you should see a sample of glue, a plastic one gallon container, and two pick up
hoses with filters. The middle tube ( Black) is NORMALLY the glue pick up tube. The clear tube is
the water pick up tube. When using water for Pre-glued dowels the black tube is now the main water
pick up tube.
3. WE RECOMMEND YOU USE DISTILLED WATER. This will keep the valves from accumu-
lating a build up of minerals that are common in most tap water.
4. Fill either the pot or the plastic container and place it in the main pot.
5. Place both tubes into the water
6. Tighten the pot lid down in an even fashion.
7. Turn the regulator up to around 10-15 PSI.
8. Go to the front of the machine and take the gun from the holster and aim it into a purge container.
PRE-GLUED DOWELING WITH WATER
Содержание DD
Страница 19: ...Pneumatic Diagram...
Страница 20: ...Electric Diagram...
Страница 22: ...Dowel Feed Bowl 1 Vibrating Bowl G2404 2 Dowel Rail Bar M2208 3 Dowel Exit Block M2209...
Страница 27: ...Electric Diagram...