ACCU-SYSTEMS DD, Руководство пользователя

Страница: 13 / 27

b. If you run out of water, then you cannot flush the glue from the system after you use the machine.
4. Flush the glue from the machine after every time you use it.
a. Be sure to flush the system within 20 minutes to insure no glue
drying in the tip. To flush the system, point the gun into the
purge bucket and flip the “H20-Run-Glue” switch to H20 until
you see a clear stream of water coming out of the gun for a few
seconds. Flip the switch back to the RUN position. Inspect the
nozzle and front of gun, removing any build up of glue with a rag.
Return the gun to it’s holster.
IT IS VERY IMPORTANT THAT YOU REMEMBER TO DO THIS
EVERY TIME
5. Once a month flush your system with hot water.
a. If you are using glue, once a month fill the pressure pot with hot water. Flush the system
with the hot water to flush out any build up of glue solids that may be present. This will as-
sure a good flow of glue and prevent glue system failure.