12
1. Components
2-2 Operating the Tug
2. Start Up Guide
ON/OFF Button/Power Indicator
Circuit Breaker Access Hole
1. Before turning on the tug, make sure the tracks and bottom of the tug are free from
obstruction.
2. Turn the tug on using the ON/OFF switch. There will be a short series of beeps
and then the ON/OFF switch will illuminate red to show the tug is on. The ON/OFF
switch light will be on solid when the battery is fully charged. When the tug battery is
low the ON/OFF switch light will blink and there will also be a beeping sound.
3. Turn on the power switch on the radio controller. The power indicator LED will illumi-
nate green/blue in color. It is recommended you practice maneuvering the tug prior
It is recommended you practice maneuvering the tug prior
to loading the plane.
to loading the plane.
4. It is recommended to use the radio in fast speed mode. Moderate and Slow speed
mode should be used when maneuvering in tight quarters as it reduces the tugs
power output.
5. When towing your airplane ALWAYS be cautious of the steering angle limitations of
your aircraft. Do not over steer your aircraft with the tug. This can cause damage to
your gear.
