27
Mainplate
Threaded Holes
Wheel Cradle Up
In the ON position, the wheel cradle should land on
the shims lifting the wheel cradle ramp away from the
ground.
Loosen the mounting screws and rotate 180
degrees to the OFF position when not needed.
Tighten screws to secure.
3. Both left and right side shims should be engaged if in the ON position or both sides
should be disengaged if in the OFF position to prevent the cradle from twisting.
2. With the wheel cradle in the “Up” latched position, install the shims onto the tug main-
plate threaded holes located near the loading end. Two shims and one mounting
screw per side.
