[60] wAppLoxx Pro Control Plus Complete
Instructions
V5
▪
Normally closed (Closed Timed NC) impulse: Relay opens for one second when
“armed”
Ready for Arm input
The Ready for Arm option requires a signal from the burglar alarm system on the wAppLoxx
Pro Control. If the alarm panel is not ready and the “Ready for arm” input is not active, the
wAppLoxx Pro Co
ntrol Plus prevents the system from “arming” and signals this via the
wAppLoxx Pro Cylinder. Input 1 is used by default (see Chapter 3).
Activity signal
You can use the “Activity signal” option to change the input processing method.
▪
High: If 12 V are
applied at the input, the alarm panel is ready for “arming”.
▪
High: If 0
V are applied at the input, the alarm panel is not ready for “arming”.
▪
Low: If 12
V are applied at the input, the alarm panel is not ready for “arming”.
▪
Low: If 0
V are applied at the input, the alarm panel is ready for “arming”.
Status
It is displayed whether this input is active.
Arm input
You can use the Arm input to “arm” and “disarm” the WAppLoxx Pro Control Plus from a
connected alarm panel. Each
time the connected alarm panel switches between its “armed”
and “disarmed” status, the wAppLoxx Pro Control Plus is also switched between “armed”
and “disarmed” accordingly. This ensures that the connected alarm panel and the wAppLoxx
Pro Control Plus have the same status. Input 2 is used by default (see Chapter 3).
Activity signal
You can use the “Type” option to change the input processing method.
▪
High: With 12 V at the input, the wAppLoxx Pro Control Plus is "armed".
▪
High: With 0 V at the input, the wAppLoxx Pro Control Plus is "disarmed".
▪
Low: With 12 V at the input, the wAppLoxx Pro Control Plus is "disarmed".
▪
Low: With 0 V at the input, the wAppLoxx Pro Control Plus is "armed".
Maximum response waiting time
Select a delay time of 10 or 25 seconds. The delay time is defined by the time the alarm
system on the wAppLoxx Pro Control Plus has to wait for feedback.
Status
It is displayed whether this input is active.
