[49] wAppLoxx Pro Control Plus Complete
Instructions
V5
Passwords can no longer be changed by the administrator if they have been
changed by the user in the user interface. If users forget their new password, the
entire user must be deleted and recreated.
After confirming the entries by clicking “Create” or “Save”, the QR code for the respective
user can be displayed so that they can connect to the wAppLoxx Pro system via app (see
chapter 12).
Permissions
The Permissions area allows you to assign various rights to the user as required for the
selected door groups.
Guard user
If users have access as a guard user, they can only “disarm” when the alarm is triggered and
receive access permissions for all doors (door groups do not have to be assigned). These
users can “arm” the system again once after establishing the cause of the alarm.
To do this, an interface to the alarm system will need to have been configured (see
Chapter 10.1)
Arming/disarming
Users are authorised to “arm” and “disarm” one or
both alarm systems on the doors of the
selected door groups.
