[43] wAppLoxx Pro Control Plus Complete
Instructions
V5
It should, however, be noted that Office mode cannot be activated for an Intrusion cylinder
that is armed.
This must first be disarmed by an authorised person.
You can find additional information on using the wAppLoxx Pro Cylinder in the
separate “wAppLoxx Pro installation instructions”.
If Office mode is enabled, any locked day profiles for the set schedule will not be taken
into consideration.
Programming the reset card
1.
You can program the enclosed reset card
under the system settings in the “System
access” menu item. Click on “Program reset card”.
2.
Then, present the enclosed reset card to the previously programmed cylinder.
3.
Successful programming of the reset card is indicated when the cylinder flashes
green and the ID card is entered in the field.
4.
Click on “Save”.
5.
The ID of the reset card is now transmitted to the programmed and all subsequently
programmed cylinders.
