[14] wAppLoxx Pro Control Plus Complete
Instructions
V5
3.
wAppLoxx Pro Control Plus connections
The function of the inputs and outputs is dependent on the configuration settings
of the wAppLoxx Pro Control Plus.
Power supply:
12 V DC / 1.5A
Power consumption:
max. 500 mA at 12 V DC
(when using the recommended power supply unit)
Attention: To ensure operation within the framework of CE approval, we recommend
only using the original ABUS power supply unit. (Item no.: 505366).
We recommend switching to a new original ABUS power supply unit particularly in the
event of problems with the power supply or if the existing power supply unit is defective.
Relay connector 1-4:
Switching power of the changeover relay: max. 30 V DC, 2 A
The relay contact is controlled via software (whether open
or closed).
Input 1-6:
12 V DC, max. 0.1 A
1.
In 1-6 (+)
(input active at 12 V DC)
2.
GND (-)
