background image

 

Recording 

 

Recording 

Time Schedule 

Open the main menu and click on Record. There are two 
types of configuration and data recording available: 

Recording 

Configuration of video stream re-
cording from connected IP cam-
eras. Continuous data streams are 
saved on the recorder.  

 

Record tab 

The time schedule is used to specify the recording times 
and triggers (recording type) for the cameras.  

 

Note 

As there is no difference between the settings for 
the Record and Capture tabs, they are only listed 
once. 

 

On the on-screen display, the hours for each day are 
listed from left to right, and the days are listed from top to 
bottom. On the right of the display, there is a colour key, 
i.e. the time frames for recording are  

 

displayed in the time schedule in a different colour de-
pending on the “trigger” (recording type) in question. 

 

Coloured icon 

Key 

Blue 

Duration: period in hours 

Yellow 

Event-controlled (e.g. PIR sensor) 

Green 

Motion detection 

Red 

Alarm 

Orange 

Motion or alarm 

Light blue 

Motion and alarm 

Grey 

No selection 

 

 

Select the camera and tick the 

Arm Time Schedule

 

box.

 

 

Click on a 

trigger

 and use your mouse to highlight 

the time period within the time schedule. Here you 
can drag your mouse over the required time period

 

Alternatively, click on 

Edit 

to configure the type and du-

ration of the time schedule down to the minute. 

 

1.  In the drop-down menu for ‘time schedule”, select the 

day to be set. 

2.  Activate/deactivate “All Day”. If “All Day” is activated, 

you cannot enter specific times as the setting now 
applies to the whole day. 

3.  If you wish to enter specific time settings, deactivate 

“All Day”. 

4.  Specify the recording type in the drop-down menu for 

“Type”: 

 

Duration 

 

Motion 

 

Alarm 

 

Motion or alarm 

 

Motion and alarm 

 

Note 

Under “Duration”, you define the time period for re-
cording. 

The other triggers, such as motion detection, only 
trigger recording when the specific trigger has oc-
curred. 

 

 

 

 

Application example 

If you want recording to run from 11:00 to 07:00, 
you need to set up two time zones: 

1. 11:00–24:00 

2. 00:00–07:00 

 

43 

Содержание TVVR36500





























































Отзывы: