Local setup wizard
Access point settings
1. The SSID is the name of the Wi-Fi network created
by the recorder. Change the name to one of your
choice
2. Set the security mode.
(Recommended: WPA2-PSK)
3. The key is the password necessary for connection to
the recorder’s Wi-Fi network. Change the password
to one of your choice. It must contain at least eight
characters.
4. Finish the setting by clicking
on
Next
.
Note
Changing the SSID settings can take up to two
minutes.
Network settings
Note
Ask the network administrator responsible
whether the DHCP can be selected or the IP ad-
dress and additional settings have to be done
manually.
1.
DHCP active: if the DHCP has been set up in the
network router, activate the DHCP ‘checkbox’ All
network settings are then completed automatically.
2.
DHCP inactive: enter the data manually (IPv4 ad-
dress, IPv4 subnet mask as well as the default set
up for the IPv4 Gateway = IPv4 address of the
router). Alternatively you can also enter the address
of the DNS server, which is required for email dis-
patch.
A typical address assignment could appear as fol-
lows:
•
IPv4 address:
192.168.0.50
•
IPv4 subnet mask: 255.255.255.0
•
IPv4 default gateway:
192.168.0.1
•
Preferred DNS server: 192.168.0.1
Note
When the device is accessed remotely via the in-
ternet, it should be given a fixed network address.
Note
If at the time of the initial installation there is no
detailed data on port and DDNS configuration,
then use the default settings recommended by the
wizard.
1. Server port: network port for remote access via
PC software and App
2. HTTP port: network port for remote access to the
web interface of the recorder.
3. Enable UPnP: enables the automatic configura-
tion of the port releases on the router and device
display in the windows network environment.
4. Enable DDNS: enables the DDNS function for
comparison of the external IP addresses with a
DDNS provider.
5. DDNS type: select the DDNS provider. There is
free DDNS access via abus-server.com.
6. Server address: not necessary for ABUS server.
7. User name and password: not necessary for
ABUS server.
16
