68
English
3.3 Video output and DIP switches
Analogue video output (NTSC/PAL):
Connect the RCA connector from the video/audio cable with an analogue video input from a
monitor. (e.g.: TVAC10100)
To set the correct video norm (
PAL/NTSC
) please use the DIP switch on the back panel of
the camera.
External / Internal microphone (
Ext. /Int.)
Use this DIP switch to change between integrated microphone and external audio input.
3.4 Gate input / output and status display
Status LED description:
In order to
reboot
the camera or restore the factory settings press the reset button. Use an appropriate small
tool.
Camera reboot:
Press the reset button once and wait until the camera to restart.
Restore factory settings:
Press and hold the reset button for approx. 30 seconds until the status LEDs start
flashing. All settings will be reset to factory default.
Status / LED colour
Green
Red
System start
Off
On
Camera turned off
Off
Off
Network works (heartbeat)
1/s
On
Network problem
Off
On
Firmware update
1/s
0.1/s
Restoring factory settings
0.1/s
0.1/s
