Abus CFA 1000, Руководство по эксплуатации

Страница: 68 / 152

68
14. Miscellaneous
a) Setting acknowledgement tone
The acknowledge tone of the door lock actuator can be set in several variations. 4 different pitches
are available and the option ”sound off”.
Proceed as follows:
• Press the small ”setup” key briefly after which the next acknowledgement tone is selected and
printed as control. With the option ”Sound off”, a short tone sounds as an adjustment acknowl -
edgement.
• By pressing the key (setup) once again briefly, the next acknowledgement is selected etc.
b) Procedure when replacing the lock
When changing the door lock actuator to another cylinder or another door/door lock, this has to
be adapted again to the cylinder lock/lock/door.
+
For this, the basic settings have to be reset.
• Press the small key ”Setup” for approx. 2 seconds to activate the setting mode.
• At the beginning the symbol ”locked” ( ) will appear as well as the display ”1” for the first setup
step and the rotating direction symbol.
• Continue the settings as described in section ”10. Basic settings”.
c) Information for handling the change code system
If the keys of the radio remote control are operated too often while these are located outside the
reception range, re-synchronisation is necessary.
If the door lock actuator does not react on the first key contact, this will take place by pressing
the same key again.
Please note that, due to the safety features of the change code process, although it is
possible to train a radio remote control to several door lock actuator , malfunction can
occur during operation due to synchronisation problems (see above).
This means that synchronisation problems are possible with remote receivers. With
several receivers within the reception range, uncontrolled locking and unlocking proc
-
esses are conceivable.